- Other Vehicle Tools[10]
- Diagnostic Tools[10]
- Other Mechanical Parts[1]
- Other Hand Tools[7]
- Kitchen Toys[1]
- Clamps[1]
- Hose Clamps[1]
- Hand Tool Sets[8]
- Other Hardware[5]
- Pressure Gauges[6]
- Other Tool Sets[5]
- Other Electronic Measuring Instruments[1]
- Testing Equipment[1]
- Other Car Care Equipment[1]
- Spot Welders[3]
- Body Repair Equipment[1]
- MIG Welders[3]
- Other Car Cleaning Tools[1]
- Tire Gauges[7]
- Tire Repair Tools[3]
- Other Tools[1]
- Wrench[3]
- Gauges[1]
- Other Vehicle Equipment[1]
- Battery Testers[1]
- Contact Person : Ms. wang helen
- Company Name : Hangzhou Fosn Precision Tools Co., Ltd.
- Tel : 0086-571-86730849
- Fax : 0086-571-86773964
- Address : Zhejiang,hangzhou city,No.379 North Wenhai Road, Hangzhou City,Zhejiang Province,China.
- Country/Region : China
- Zip : 310019
FSsb9115 cleaning equipment cleaning the fuel-injectors tools
1.Rea,understand,and follor"safety precatuons"before using Fuel Injector Cleaner.
2.Run the vehicle until the engine reaches normal operating temperature.shut the engine off.
3.Turn regulator on top of fuel injector clean to full open position.(counterlockwise).Leave the lifting on the end of the regulator open-do Not connect shop air.
4.Close the shut-off valve at the bottom of the fuel injector cleaner.
Note:Valve is OFF if it is turned all the way clockwise.
5.Remove top and regulator assembly from top of fuel injector cleaner.Fill the container with one bottle of D-Karbonizer.Install top regulator assembly again.
6.locate a manifold vacuum port(not ported vacuum).near the trotlle body or carburetor.(this will distribute the decartonizing solution more evenly).
7.connect the decarbonizer hose(with adapter)the manifold vacuum port opeaning the shut-off valve.(the engine will rough and RPM will edcrease.do not manually increase PRM)
8.When the container is empty,turn the engine off.
9.Remove the adapter fitting from the engine.connect the vacuum hose.
10.Let the vegicle is for at least 30minutes to allow the solution to work on soft carbon deposits.
11.Test drive the vehicle for at least 15 miles to flush loosened carbon deposits out of the system
cleaning equipment
FSsb9115 cleaning equipment cleaning the fuel-injectors tools